Driven roller conveyor

Driven roller conveyor AG:

This roller conveyor is driven. The drive is provided by frequency converters.Transport speeds can be adjusted. The rollers are driven by frictional force. For this purpose, driven cast bearings are mounted in thick-walled precision tubes. These are driven. Depending on the weight of the support, the contact pressure increases and the frictional force is increased. The roller distance is 350 mm. The load capacity is 1000 kg/m and is therefore also up to the challenge in many heavy areas.A roller conveyor meets the most difficult requirements, of course "made in Baden-Württemberg".

AG 1000 roller conveyor 1 meter long 500 mm wide stable design load 2 to/m for discharge or supply side

AG 2000 roller conveyor 2 metres long 500 mm wide stable design load 2 to/m for discharge or supply side

AG 3000 roller conveyor 3 metres long 500 mm wide stable design load 2 to/m for discharge or supply side